Consolidated Sterilizer Systems Introduces SterilSource, a Premium Water Purification System for Healthcare Facilities and Life Science Labs Written by: Consolidated Sterilizer Systems May 2026, Billerica, MA — Consolidated Sterilizer Systems is proud to announce the launch of SterilSource, a compact wall-mounted water purification system designed to meet the demanding water quality regulatory requirements of healthcare and life science environments. SterilSource is available in three configurations, offering scalable water treatment solutions from basic mineral and contaminant removal to full compliance with AAMI/ANSI ST108 water quality standards: Reverse Osmosis (RO:): Carbon and anti-scalant filters combined with dual, high-capacity reverse osmosis (RO) membranes remove dissolved minerals and contaminants, protecting steam generators and sterilizers from scale buildup. RO/DI: Adds deionization (DI) polishing filters after the RO stage, resulting in higher-purity water for demanding sterilization applications, to meet the water quality needs of stainless steel generators. RO/DI + ST-108: Consolidated’s most complete water treatment solution adds a bacteria and endotoxin filter and recirculation pump to prevent stagnant water and maintain compliant water quality at all times. The advanced recirculation feature of the RO/DI + ST-108 configuration keeps water continuously in motion, passing through the final microbiological filter and wall-mounted reservoir. This mitigates potential health risks and protects the equipment from issues caused by water stagnation and its associated bacteria and biofilm growth. The 15-gallon sanitary storage tank further supports system integrity with an internal spray ball, air vent to block outside contaminants, and a float sensor that signals the controller to replenish the reservoir with fresh water as needed. Built for Healthcare, Available for Life Science SterilSource is Consolidated’s first compact water purification system engineered to meet the demands of healthcare environments. Compared to conventional RO systems, SterilSource delivers up to four times the water output through parallel filtration, ensuring consistent water availability even during continuous sterilization cycles while meeting AAMI/ANSI ST108 water quality standards. The entire system (including a 15-gallon sanitary storage tank, dual RO membranes, filters, and controls) mounts directly to the wall for a reduced footprint that’s ideal for crowded sterile processing areas. For life science customers, SterilSource presents a premium upgrade path over the WPS-1200, offering enhanced capacity, sanitation, onboard monitoring, and a more compact installation profile. Key Features Across All Configurations All SterilSource systems include the 15-gallon sanitary storage tank as well as a feedwater pump and motorized inlet ball valve. Additionally, all configurations come with an onboard conductivity meter with an alarm that monitors water quality in real time and alerts users when filters need replacement. This takes the guesswork out of maintenance scheduling and helps facilities avoid compliance risks of degraded water quality. Complete Your ST-108 Setup For a complete ST-108-ready solution, pair the SterilSource ST-108 configuration with a CSS healthcare steam sterilizer featuring all stainless steel plumbing, a stainless steel generator, and the SterilSteam Sampler. Plus, CSS’s water testing services provide peace of mind by keeping water quality in check. Together, this integrated system supports optimal water filtration, simplified routine steam sample collection, reliable sterilization performance, and consistent water quality to ensure compliance with AAMI ST-108 standards. To learn more about SterilSource, visit the product page on our website or get in touch with our team. About Consolidated Sterilizer Systems Consolidated Sterilizer Systems has manufactured steam sterilizers (autoclaves) in the USA since 1946. Through years of research and development, their products have satisfied leading academic, healthcare, food safety, and biotechnology facilities around the globe. Customers worldwide come to Consolidated because their product line offers the best price, functionality, and predictable quality in the industry. Consolidated markets and sells its products in over 70 countries through qualified sales teams and manufacturer sales representatives. 17 Questions to Ask Before Buying Your Next Autoclave We created this 17-question eBook as a framework to help you explore and discover the exact type of autoclave best suited to your needs. Get eBook Tweet Like Share
Consolidated Sterilizer Systems Introduces SterilSource, a Premium Water Purification System for Healthcare Facilities and Life Science Labs Written by: Consolidated Sterilizer Systems May 2026, Billerica, MA — Consolidated Sterilizer Systems is proud to announce the launch of SterilSource, a compact wall-mounted water purification system designed to meet the demanding water quality regulatory requirements of healthcare and life science environments. SterilSource is available in three configurations, offering scalable water treatment solutions from basic mineral and contaminant removal to full compliance with AAMI/ANSI ST108 water quality standards: Reverse Osmosis (RO:): Carbon and anti-scalant filters combined with dual, high-capacity reverse osmosis (RO) membranes remove dissolved minerals and contaminants, protecting steam generators and sterilizers from scale buildup. RO/DI: Adds deionization (DI) polishing filters after the RO stage, resulting in higher-purity water for demanding sterilization applications, to meet the water quality needs of stainless steel generators. RO/DI + ST-108: Consolidated’s most complete water treatment solution adds a bacteria and endotoxin filter and recirculation pump to prevent stagnant water and maintain compliant water quality at all times. The advanced recirculation feature of the RO/DI + ST-108 configuration keeps water continuously in motion, passing through the final microbiological filter and wall-mounted reservoir. This mitigates potential health risks and protects the equipment from issues caused by water stagnation and its associated bacteria and biofilm growth. The 15-gallon sanitary storage tank further supports system integrity with an internal spray ball, air vent to block outside contaminants, and a float sensor that signals the controller to replenish the reservoir with fresh water as needed. Built for Healthcare, Available for Life Science SterilSource is Consolidated’s first compact water purification system engineered to meet the demands of healthcare environments. Compared to conventional RO systems, SterilSource delivers up to four times the water output through parallel filtration, ensuring consistent water availability even during continuous sterilization cycles while meeting AAMI/ANSI ST108 water quality standards. The entire system (including a 15-gallon sanitary storage tank, dual RO membranes, filters, and controls) mounts directly to the wall for a reduced footprint that’s ideal for crowded sterile processing areas. For life science customers, SterilSource presents a premium upgrade path over the WPS-1200, offering enhanced capacity, sanitation, onboard monitoring, and a more compact installation profile. Key Features Across All Configurations All SterilSource systems include the 15-gallon sanitary storage tank as well as a feedwater pump and motorized inlet ball valve. Additionally, all configurations come with an onboard conductivity meter with an alarm that monitors water quality in real time and alerts users when filters need replacement. This takes the guesswork out of maintenance scheduling and helps facilities avoid compliance risks of degraded water quality. Complete Your ST-108 Setup For a complete ST-108-ready solution, pair the SterilSource ST-108 configuration with a CSS healthcare steam sterilizer featuring all stainless steel plumbing, a stainless steel generator, and the SterilSteam Sampler. Plus, CSS’s water testing services provide peace of mind by keeping water quality in check. Together, this integrated system supports optimal water filtration, simplified routine steam sample collection, reliable sterilization performance, and consistent water quality to ensure compliance with AAMI ST-108 standards. To learn more about SterilSource, visit the product page on our website or get in touch with our team. About Consolidated Sterilizer Systems Consolidated Sterilizer Systems has manufactured steam sterilizers (autoclaves) in the USA since 1946. Through years of research and development, their products have satisfied leading academic, healthcare, food safety, and biotechnology facilities around the globe. Customers worldwide come to Consolidated because their product line offers the best price, functionality, and predictable quality in the industry. Consolidated markets and sells its products in over 70 countries through qualified sales teams and manufacturer sales representatives. 17 Questions to Ask Before Buying Your Next Autoclave We created this 17-question eBook as a framework to help you explore and discover the exact type of autoclave best suited to your needs. Get eBook Tweet Like Share
5.28.26 Consolidated Sterilizer Systems Introduces SterilSource, a Premium Water Purification System for Healthcare Facilities and Life Science Labs → May 2026, Billerica, MA — Consolidated Sterilizer Systems is proud to announce the launch of SterilSource, a compact wall-mounted water purification system designed to meet the demanding water quality regulatory requirements of healthcare and life science environments. SterilSource is available in three configurations, offering scalable water treatment solutions from basic mineral and contaminant removal to […]
5.14.26 Consolidated Selected as Small Business Manufacturer by the University of California → What Set Us Apart Throughout the RFP process, Consolidated stood out for our: Relationship with UC, which predates this agreement, with many campuses already standardized on our autoclaves Low cost of ownership through non-proprietary parts and third-party service models, including local service Built-in water- and energy-saving features Support for both in-house and generator steam Custom […]
12.10.25 Introducing SterilSteam Sampler, The Steam Condensate Sampler for AAMI ST108 Compliance → Released in 2023, AAMI/ANSI ST108 establishes water quality requirements for water used in the cleaning, rinsing, disinfection, and sterilization of reusable medical devices. In addition to these requirements, ST108 mandates quarterly testing of steam condensate quality to ensure incoming steam does not stain instruments or pose a risk to patient safety. To help healthcare facilities […]