Medical Device Sterilization: 4 Alternatives to Ethylene Oxide Written by: Arthur Trapotsis With thanks to Emily Lorcheim of ClorDiSys Solutions for her contributions. Ethylene Oxide (EtO) is the man-made chemical that’s responsible for sterilizing roughly half of the medical equipment used in the U.S. today. The popularity of EtO as a sterilizing agent stems from its versatility — it’s compatible with a wide range of materials, highly […] Tweet Like Share
Autoclaves for Orthopedic Surgery: Best Practices to Follow Written by: Arthur Trapotsis In order to ensure patient safety and achieve successful surgical outcomes, orthopedic surgery centers (OSCs) need to sterilize all equipment — including implants — before use. As demand for total joint surgeries and outpatient procedures increases, so, too, does the total volume of implants, instruments, and other equipment that requires processing. Steam sterilization is one […] Tweet Like Share
Do You Need a Large Capacity Autoclave? [Or Do You Just Think You Do?] Written by: Arthur Trapotsis The definition of the word “large” can be subjective — what one person considers massive, another might find diminutive. In the world of steam sterilization, the commonly held wisdom is that any autoclave that requires a pit or is big enough to walk inside of, is considered a “large capacity autoclave” or a “bulk autoclave.” […] Tweet Like Share
CSS’ New Healthcare Autoclaves Are Full of Exciting Features Written by: Scott Mechler As of August 2, 2022, Consolidated Sterilizer Systems’ new line of healthcare steam sterilizers have received clearance from the U.S. Food and Drug Administration — and we couldn’t be more excited. Designed and manufactured specifically for use in healthcare facilities, including hospital and ambulatory surgical centers (ASCs), our healthcare autoclaves (Consolidated HC Steam Sterilizer models […] Tweet Like Share
Autoclaves for Mushroom Cultivation Written by: Scott Mechler For mushroom growers, contamination from trichoderma, bacteria, mold, and more all pose a risk to your crop. Some of the leading causes of contamination are airborne contaminants and contamination from incorrectly sterilized or improperly pasteurized tools, substrates, and/or cultivators. One of the most effective ways for mycologists to avoid mushroom contamination is to establish a […] Tweet Like Share
Sterilization in the Cannabis Industry Written by: Dan Butler Public perception of cannabis has dramatically changed over the past decade, with two-thirds of Americans now in favor of legalization, and an entire industry has sprung up around. In fact, Grandview Research valued the global legal cannabis market at $13.2 billion USD in 2021, with a projected compound annual growth rate of 25.5% from 2022 […] Tweet Like Share
How to Clean Your Autoclave’s Chamber Drain Strainer [w/ Video] Written by: Arthur Trapotsis Have you ever, after getting out of the shower, grabbed a piece of tissue and used it to quickly clear the drain of any hair, soap residue or other debris? If you have, you know firsthand that taking a few moments to clean up after yourself can prevent bigger issues further down the line — […] Tweet Like Share
Autoclave Basics: Chamber Cleaning Instructions [w/ Video] Written by: Arthur Trapotsis The idea of cleaning your autoclave’s chamber on a regular basis might seem counterintuitive — after all, autoclaves are designed to sterilize lab equipment. Wouldn’t it naturally follow that the chamber is also sterilized each time you run a cycle? The reality is that, without routine cleaning, the moisture, high temperatures, and pressure that make […] Tweet Like Share
Autoclave Wall Seal Options, Explained Written by: Scott Mechler Though less flashy than other parts, the wall seal around a pass-thru (double door) sterilizer s one of the most essential components of apass-thru autoclave’s design. That’s because this seal creates a barrier between the contained room and non-contained room (or clean room vs dirty room) thereby preventing any possible contaminants from escaping the room. […] Tweet Like Share
Sterilizing Medical Equipment Written by: Arthur Trapotsis Medical professionals are legally obligated to provide patients with a standard of care. One of the key requirements for meeting this standard of care is the proper sterilization of medical equipment. Healthcare organizations are audited by various groups; chief among them are The Joint Commission, DNV-GL and the Center for Medicare & Medicaid Services (CMS). […] Tweet Like Share
2.28.24 Setting up your SPD for Success: 8 Reasons to Own a Backup Autoclave → Steam is the most reliable and effective method for sterilizing medical equipment, and as a result, autoclaves are a fixture in almost every ASC’s sterilization setup. But, as is often the case, there are numerous situations in which ASCs find themselves without sufficient sterile processing capacity or a backup plan for when main units are […]
2.7.24 Consolidated Earns ACT Label, Highlighting Commitment to Sustainability → Have you ever wished that you could review an autoclave’s energy and water use, manufacturing impact, and packaging content similar to how you’d read a nutrition label at the grocery store? That’s the idea behind the ACT Environmental Impact Factor (EIF) label. Short for Accountability, Consistency, and Transparency, the ACT label demonstrates the environmental impact […]
7.12.23 Cordyceps Sterilization: How to Kill “The Last of Us” Parasite → In HBO’s recent adaptation of “The Last of Us,” a popular action-adventure video game, life as we know it is upended by a parasitic fungus that transforms its human hosts into zombies. The culprit? Cordyceps, a real-life genus of fungus which is best known for infecting insects (most famously ants) in much the same manner […]
